Great people Great service and great work very fair prices would recommend them to all my friends 👍 much thanks Freddie Higgins

Have used their services for years and they have never done me wrong and no joint repaired by them has ever gone out.

Awesome people Knowledgeable peopleDefinitely recommend them !

Quick to help and knowledgeable on specific components.

Had to stop in at lunchtime and they were ready to help, they didnt have the part I needed in stock but got on the phone and found it right down the street and took care of my driveshaft fast!

Great service and even better prices..Good enough to drive 4 and a half hour for.

Great customer service. Very smart.

Tim did a great job on this flywheel

Fast friendly service

Built a drive shaft for my 62 impala fit perfect fair price runs smooth as silk will use them again

When you take your vehicle there they know what they are doing

The only place I trust for this type of work. They stand behind their work.

Took my 2 piece driveshaft from my 2012 GMC 3500 to get fixed. They completely redesigned it. Had it ready in under a week. Quality customer service. Definitely recommend this place.

Took ring n pinion to them to have it rebuilt. Only problem I had is I was told it would be done on Wednesday and then was told the guy building my ring and pinion went to lunch and didn’t come back (family energy so I was told). I have not had a problems with the build.

Got a driveshaft shortend. Was done for exactly how much they said it would cost. And was done exactly when they said it was going to be done. Great job!

Took front prop shaft to these guys off my truck after putting in a (4l80e) larger transmission. Needed the shaft shortened and high speed balanced. Got it back, installed and had crazy vibrations. Took it out, clocked it 180° and still had the vibrations. Took it out again, and went to a driveshaft shop right by me in hurst for a balance. The guy informed me that there were ZERO balancing weights on the thing, and it appeared the previous shop (these guys) never balanced it. I needed the truck back on the road, so I paid that guy to balance it and after reinstalling it, no more vibrations.

Great friendly service. Seems to be honest and goes above every one in the business.

From start to finish, Toby help a tough situation be as good as could be hoped for. His estimate was spot on....as for cost and time involved. Much Appreciated. Its never fun to have an On the Road breakdown, thanks Toby, and all the folks at Ft Worth Gear and Axle.

Terrible customer service. I spoke with John Cave in August about having a 12 bolt rebuilt with near gears. He was rude and short, but I figured whatever since the place had such good reviews. It took nearly two weeks to get my rear end back, simply because John forgot to call. I picked up the rear end, installed it, and the truck sat for a few months until I could get it road ready. I finally got the truck on the road in early December. I drove it from Saginaw to Bryant Irvin road and the truck sound like ball bearing were in the stall converter. I had it towed to a local shop and they determined the rear end was shot. I call Ft. Worth Gear and Axle and spoke with John. I described the sound and the first thing out of his mouth was, Did you put oil in it? Every time someone calls talking about a funny noise, its because they didnt put oil in it. Clearly, John had had to deal with this issue many times. He claimed there was a tag on the rear end stating to put oil in it and what kind, but anyone can claim anything. There was no tag. I was simply given a receipt by the lady in the office and that was all. The closest thing to a tag on the rear end was the metal placard they placed with their logo and contact info.

Best place in town been going there for decades

Great job fixing the driveshaft of my F250. Also very nice people. They straightened, balanced, installed new u-joints and a new yoke then painted my driveshaft for less than $300. Great people.

Very honest, fair price, quality work! 100% would recommend and would go back if I had to. Light duty truck, rear diff and transfer case work done. Very good shop!

The guy that I spoke with David he was well professional I was satisfied with our conversation Im looking to go back and doing business with him

Great mechanics

Great place great people great games

Helped me get the right parts the 1st time. They knew everything I needed for the job

Had front and rear rings and pinions replaced to compensate for lift and huge tires. Gary was very helpful, gave great service, had it done in timely manner, and even shaved off some cost for being a firefighter. Great guy. Great company. Ill be referring anyone with drivetrain issues to these guys. Thanks! BTW, my truck runs soooo much better now.-Justin

Is a great place to do business with the staff is very friendly and knowledgeable we have been doing business with them for years I would definitely recommend these guys.

Great place. Great service. Fair prices

Great people built a drive shaft and it works great thanks

Awesome service. Gary fit me in schedule even when fully booked.

No one else comes close in the state.

Looked up my local Dana Spicer dealers. Called my local friends in the area. They said go here. Called them up and said I need an axle shaft for a Dana 60 from a one ton dodge. Lady tells me we dont deal anything under a ton... gues Im calling my Michigan Dana dealer.

I sincerely apologize to the two gentlemen that were behind the counter eating their Chicken Express lunch when I came in with my two drive shafts I should have came in at a better time again I sincerely apologize believe me it wont happen again!!!!!!!!!!

Great prices and quick turn around

Good quality work, great customer service.

Phone tag is common. Poor call back when ready. Work is exceptionally good.

Good fast service and the stand behind their work

My 387 Peterbilt had catasrophic damage to the clutch and gearbox on October 16, 2015. I had it towed to Rush Truck Centers in Fort Worth. After a couple of frustrating phone calls to Rush Truck Center and a quote that would make me go bankrupt, I had the truck towed to Fort Woth Gear & Axle.FWG&A do not work on weekends First thing Monday morning they had it torn apart, diagnosed and quoted.I had an EGR &DPF delete done to this truck & the ECM turned up to North of 650 hp, so theres in my opinion half the reason why the input shaft broke off. That, & the 771k miles on the clock. But after explaining this they upgraded the box to heavy duty gears, so it could deal better with the higher torque. Something Peterbilt would not do for me.As with anything Fort Worth Gear & Axle installed a standard clutch, which, right out of the saddle did not perform as expected. FWG&A adjusted the clutch again, and the next time the tuck pulled in, later thet week, they yanked the standard clutch ad replaced it with a Lipe clutch.Labor at $90.00 per hour and the complete rebuild installation, new bell housing, upgrade to gears & Lipe clutch, it came to $7 500.00.Fort Worth Grea & Axle cant be beaten for value for money, efficiency, knowing what the heck they are doing (knowledgeable) and integrity. They get full marks for communication (good job on that, David)Before you try Peterbilt, or any other dealership for drivetrain issues, give this mob a call and see what they say. I can recommend them any day of the week & twice on Sunday.

These guys know what they are doing!!!!!!! You must bring your truck here!

Great service, they get the job done.

Weve been using Ft Worth Gear & Axle for misc. Drivetrain Component Repairs for years, and could not be more satisfied. Price, Quality, and Service.. Theyve got it all. Thank You Ft.W G & A!~ EuropAsian Auto ProsGrand Prairie, TX

Best differential service.

Always a good help to get the job done

Good process good location good service

Great service and great people

Had the rear end of my Jeep rebuilt. Just had to get all the bearings replaced that they did. Ive only put 10,000 miles on the Jeep since they did the work.

Good job on Drive Shaft

Excellent work and quick turnaround

Went there for a tough find on Auto Parts they took care of me

Friendly and knowledgeable staff

Dropping off a driveshaft.

If they dont have it theyll get it.

Super knowledgeable

Good people.

I had what I needed

Great service

Good place

Very knowledgeable

Good people

Friendly sraff