Red is awesome really helpful and nice guy. helped save me thousands by confirming my k20 head wasnt cracked and that it was just casting, port, polished, did a valve job and installed all my parts including my valve guides all for a good reasonable price. definitely going back for my future builds

Honest and upfront. Readily offered ideas to save me money and were easy to talk to. Fast service. Will definitely be a returning customer.

Red knows what he is doing the staff seams very knowledgeable. If you want the job done right bring your engine here! if you just want it done and dont care about quality, .. dont waste Reds time! He does it one way and only one way... THE RIGHT WAY.

Red was very knowledgeable. Quick and know what they are doing! Busy busy shop!

Great shop, very knowledgeable and very helpful. This was the first time I got any work done on a motor before and they answered my questions and helped me figure out what exactly I needed done.

Where do i start... I had my duramax engine built at hunter machine. Only to have catastrophic failure after failure. The block never got decked the machine work was meh and the reassembly was horrible. They put freeze plugs IN MY WATER JACKETS where they were not supposed to be which overheated the motor 3 times till i figured it out . i had to pull my motor out 3 different times trying to figure this problem out. Once i did i got the engine put all back together only to find a major oil leak that i had to one more time pull my engine out again to find a oil galley plug intalled incorrectly. Once i figured that out i had to repair the leak and put the motor back in the truck. I finished it up and have since driven it About 7000 miles, which i hesitated to drive the truck from fear of the truck breaking down. Only to lose oil pressure and lost all coolant. Where did it go you ask, well it came out another freeze plug that was installed incorrectly. Filling the crankcase with coolant which pressurized the oil enough to blow out the rear main seal. The freeze plug that came out was behind the water pump. The freeze plug got chewed by the timing gear an oil pump ruining both. And so as i sit right now my motor is out of the truck once again unable to drive . which in turn will cost thousands of dollars to fix once again.I WOULD NEVER USE HUNTER MACHINE EVER AGAIN.

Hunter machine is a joke paid as much for a rebuild as for a new crate engine red told if I put all brand new parts on that it would run better than when I bought it new 18 thousand miles it’s leaking like a water fall main seal

Had a flywheel resurfaced here. Quick and easy, happy with results.

These guys are the best! In my opinion for what I needed done they went above and beyond expectations, great friendly staff Im always very supportive of small businesses, Ill be sure to refer them to my friends that have any machining needs and Ill be back myself when needed in the future!

Red and the crew are the absolute best machine shop around. Id say Red has forgotten more about engines than most have ever known.

Did a great job on some Cylinder heads for my customers boat.Red or Bryan are the go to for High Performance or racing builds. And if they have something they know where to get it.

Took my 4.3L engine in for a rebuild and got a call from Red later on the week that my engine show a tiny cracked on the block and itll cost me way more to fixed than what is worth! They couldve putt it together and make it look new again and charge me and itll last me a year or so but Hunter Machine was truly honest with me and advise me to other options. I highly recommend Hunter Machine to anyone who knows nothing or pro for any machines work for their engines. Cheers and Thank You Hunter Machine.

Great place to get all your machining done.

Best machine shop experience I’ve ever had, super friendly, super quick turnaround time, and quality work done beyond expectations at very reasonable prices.

This guys are awesome !!!! Always willing to help my mechanic needs

Thay had the cylinder head done in good timingAnd did very good job on themThanks

I grew up next to Red and was great friends with his oldest son. Great family and great love a racing machining and repair. I knew when they opened their shoo that they would succeed. I am very impressed by the clean organized shop . Very nice! That attention will flow right into your quality and repair.

Always good work. Good group of guys that know their stuff.

Great work and great people.

They were very quick at resurfacing, inspecting, and cleaning my head at a fair price. Everyone there was friendly. Id highly recommend!

Very helpful staff

Honest and upfront. Very rare to see a business who will help you. The owner will give you options and ideas to save you money. Never pushing unneed or expensive Services you dont need. They have helped with many of my customers, and my own classic cars.

They did a great job. Their estimate was accurate and the time they took was exactly what was expected. I will definitely use them again.

I handed the owner a small part. No matter what, there wont be a lot of money made, on this job. Instead of throwing me out, he says, is tomorrow soon enough? Excellent service, great prices and accurate work. My new favorite machine shop.....thank you, especialy considering how small time my work was.

Get you head cylinder rectified or your bearing removed. the owner it will to help and guide to what is the best solution for your problem. My go to place for these type of repair

Old man Red still knows his stuff. Always does a good job.

These guys did a great job. Will be bringing my Cobra motor back for some work, Im very happy with the work they did for me in the past

They are awesome. Real price given up front and work done right. The gave great advise, knowledge, and friendly help all free of charge. Their machine work and labor was more than fair. The owner truly cares about his customers. They did the motor in my 69 Chevelle. Because of the owners superior craftsmanship it was 368 rwhp with old closed chambered heads. THAT IS AMAZING.

Hmmm. They did a very good job. Its been a few hundred miles on my fresh head. Zero hiccups and I still remember how knowledgable the guy was, ibsay guy because Im only 70% sure his name was Red; its been a while. If you want a good shop dont think twice. When I used to work at the local Ford dealership down the street all my coworkers agreed they were the bees knees and shoot we even sent stuff their way to do work for us.

Brought a random job that is not an everyday request and he was super willing to help and charged hardly nothing to do it. REALLY nice guy

Redd and the crew are awesome. I have a repair shop in West Valley and have had at least 200 valve jobs done, only once did we have a problem with a valve and they not only repaired it quickly but paid me to re-remove the head and bought all gasket sets! It is great to have a true machinist that is knowledgeable and fair. Thanks for your hard work guys.

I have used Hunter Machine a number of times over the past few years. Their prices are fair, they do good work, and they dont do work that is not needed. Red the owner is an expert in his field. He is very knowledgeable. He takes the time to explain why the work need or does not need to be done.

There guys are great to work with! I had to find a machine shop outside of Elko Nevada and found them through a Google search. Judging from the pictures of there shop and other reviews, I gave them a call. I found them very knowledgeable and prices were more than reasonable. Furthermore, they could answer all my questions in regards to my engine repair! I recommended Hunter Machine to another friend in Elko. He called and found that they could do the bottom end work to his LS. It will be there soon. Great job guys!

Red, was up front anda honest dude! Did amazing work at a reasonable deal. Thanks guys, the heads are amazing and my truck runs great!

Ive taken several heads for full service and flywheels that needed to be resurfaced/turned. Lightening fast turn around time with A+ results. Red is a funny and friendly guy!

Red is very experienced machinist with his family as well I only trust these people will 24 years experience and 3 Master under my belt to do my machine work

Spent thousands with him last year with two motors, had a problem with the one so I pulled it out of the car and he took care of the issue BUT was an a** about it, tryed charging to work that was covered under warranty AND did not finish assembly as covered under warranty. After discussing amount he told me to just take it but to promise to never come back. NOT THE WAY TO DO BUSINESS. Do it right the first time so you dont waste my time, your money.

I have mixed feelings about this place. They used to be really good...but last item I took there it wasnt done correctly and I had to disasemble and clean and fix what they didnt do. So Im not impressed.

Love this place. Great bunch of guys.

Did a good job on the BMW head. Came back really clean and all the valves are tight.

They always do a very precise and excellent job for a fair price I would recommend them to anyone

Did what I asked and did it well enough.

I have used Hunter machine for as long as i can remember, Red and his crew are very helpful

Great staff friendly and very informational.

The absolute best motor building shop! Been in business over 30 years!

After a so called rebuild from a so called friend and 2800.00 laterI took my engine to hunter and ReddWas the best to work with the engineIs better then new now I can finish myRestoration of my 67 Econoline van!!!

Never going here again! Initial estimate for a cylinder head repair was 150. I call to see if its ready, final bill is 388! Well call if its much more than 150 no one ever called me! Rip off artists at their best!

BADASS CARS NEED A BADASS MACHINE SHOP THIS IS THE PLACE

Good, personable guys. Good quality work. I will return.

Always solid and reliable.

Love me some RED

Terrible quote compared to the cost after hand.

Highly skilled and processional

Fantastic machine shop

Red is the best.

Red is awesome