He didnt do the type of work on an engine that i was working on, but he took the time to help with some ideals.

It doesnt get any better than Brooks Elliott! Ive been using Brooks for 8 years and never had an issue with any of his work. Brooks was able to find problems with cylinder heads, other machine shops couldnt. Saves me time and money! Brooks Elliott for president 2018!!!

They do excellent work. The only negative thing I can say is. It takes awhile to get your parts back. Due to how busy and how good they are.

The owner of this place flat out refused to do a pressure test on my dt466 cylinder head. Saying he didnt want to work that hard. To me this strongly reflects on the quality of work his customers receive. Just keep this in mind guys.

Brooks is awesome. Got my head repaired with new valves, guides and seats. He even noticed one of the threaded holes on the outside of the head was stripped. He put in a threaded insert for me. His work is beautifully done couldnt be happier.My cars timing belt slipped and caused all the valves to get bent from hitting the pistons. Its an interference motor.He let me know the valve guides were out of spec and it was likely burning oil, which it was. He also double checked with me about the tolerances he was going to use for the valve job. Its great to hear things like that.Highly recommended.

Brooks Elliott is the best! I would not go anywhere else for cylinder head work. Shop is clean and well organized. Heads comeback perfect - in plastic bags.

Would only recommend the best. Elliott all about dine the job right from start to finish. Very clean shop, you would even think he work on cylinder heads.

Im new to the area and needed to get some heads machined. After some quick Google research, picked this guy because he was on my side of town and had great reviews.Brooks went above and beyond. He took a really ratty pair of heads off of 95 4Runner that had run on a blown head gasket for who knows how long, and turned them into something that looked like they had just come from the factory. He also cleaned up the valves, replaced some that were beyond help and set the clearances.He had the heads done on time and for a fraction of what it would take to get it done at a dealership or some name brand auto mechanics shop.His shop is clean and well maintained. He always returned my phone calls and texts promptly.I will definitely be returning for any other machine work that I may need.

I have worked with Brooks both professionally and personally over the last two decades and I know when I have him work for a customers job or for me personally that I am getting the best possible work in town, and probably anywhere. He knows his profession, and I would recommend his work to anyone.KMM

Brooks really knows his stuff and is happy to walk you through everything he is going to do and he makes sure he understands your needs

Great mechanic does work and speedy service.

Ive been using Brooks for years, hes machined every cylinder head Ive ever needed done. Most recently I had him do the valves, guides and seals on my BMW S54 head, he also did a multi-angle valve job on it. I got it back in a few days, looking better than new, and the car dynoed ~328whp... around 10whp higher than similar setups. Couldnt be happier with his service.

Used many times. Always top notch work

This is the first time I have had a head redone and I was going to just get any old shop to do it. Then Brooks took the time to show me the valve stems were loose and one of the valves was stepped instead of sloped and the valve seats were smashed in.Since I track this Miata and it has the much sought after 1999 BP4W head, I replaced the valves, springs and valve guides.Very knowledgeable with over 35 years experience. If you want it done right, go to Brooks, if any old rebuild will do then go to Autozone.Brooks has a waiting list which speaks volumes.

I know for a fact,that he is awesome with old Pontiac and Oldsmobile heads.I will not take any heads to anyone else.Great job!

People I was with picking up work th at was done.

Top notch! The mans shop is like a laboratory more than anything. Awsome price. Totally impressed. Hes very knowlegable and cool. If you want to meet Ken blocks father get some machine work you wont regret it He got the job done in a matter of hours on the same day. I probably wont be seeing him anytime soon because my engine is now never going to break down. Thank you dood!

Brooks always does what he says, and extremely smart about cylinder heads and engines.

Brooks has handled all of my automotive shops cylinder head needs for over 10 years. We count on Brooks to deliver top notch quality and hes never let us down.

Awesome work, I got my cylinder head back in 2 days and it came back very clean, flat and the valves were adjusted perfectly. My honda sounds like its new again and got another 1 mpg back

Best cylinder head shop in Austin.

Austin Machine shop

Very knowledgeable individual

Brooks is the Man! He salvaged an aluminum BMW head for me that another shop messed up.Ill never go anywhere else for head work.