Swede Nelson makes some of the best molds I own. They are well made and just as important, throw a bullet that conforms to the size its supposed too.NOE also is fast to respond when you have questions which is a really unusual in to days world.

Excellent company to deal with. The molds they make are my favorite molds in my collection. Always easily cast great bullets. Very consistant bullets with low reject rate once up to temp. Will definitely be buying more NOE molds.

Never been disappointed with any NOE product. Cant say that for their competitors. Quality stuff and solid customer service. Glad I found them.

I currently have two NOE molds and love them both. Easy warm up, good temp stability, great bullet shape and function. I treat them as the finely designed instruments they are. Thank You for the exceptional quality!

Excellent quality. All cavity edges are cut clean with no burrs and the fit of the sprue plate is tight. The mold halves align very nicely. After a degreasing with a Qtip it cast beautifully once warmed up.

I have several NOE molds. They are great designs and they are a delight to cast with. Highly recommend.

It took me a bit, with help from NOE, I’ve been dropping bullets that WAY surpasses my expectations. I shoot .45acp & 10mm stuff. My bullets are great! Thanks amigo.

Best quality and best service! Tried several custom molds, NOE has them all beat!

I have 4 different moulds ranging from 9mm, 45acp, and 458 socom. I’ve dropped roughly 5k bullets collectively without issue. I will continue to order from NOE

I own 3 NOE molds and LOVE them!

Awesome Product 225-35-RF-BY5 4 Cavity GC,ordered fri on the 9th and got it on Mon.It was designed for the 22tcmr which will shoot just fine in a regular 22 tcm.I cannot say enough about NOE these people are the real deal.this is the 2nd mould I have bought from NOE and have had nothing but excellent results.I cleaned the mould really good and sooted the cavitys and lubed with candle wax and preheated my mould and literally had useable bullets on the first cast.Great Product Awesome service whats not to like.Clay Smith

I have been doing business with NOE for years. Straight up outfit, not too big to care about each customer. The quality and accuracy of each mold is impeccable. With the exception of the Lee drive key shotgun mould, I have not purchased a single mould from anyone since discovering AL Nelson and his crew at Night Owl Enterprises. You might think the prices are a little high, compared to say, Lee, but you have to consider quality and value. I have moulds with literally 20,000 bullets cast through them. Damn, I shoot a lot. Thanks, Al!

My NOE mold runs bullets like a champ.

I buy American products every chance I get and NOE is the perfect example thereof. Their customer service is excellent I highly recommend them.

NOE bullet molds has absolutely outstanding customer service. An actual human being called me after I placed a confusing internet order. Al Nelson helped me sort out what I actually needed and I was shocked to find out that he is the owner. That level of caring is rare these days. I will be purchasing from NOE again and recommend that you do too.

I am brand new to casting and am very pleased with my NOE moulds. I was able to get nice shiny, perfect bullets on my very first pour. I just ordered my 4th bullet mould and have an ingot mould as well from NOE.

NOE produces the highest quality bullet molds I have ever seen. Owner Al Nelson is a kind an very helpful gentleman. Buy molds from NOE. You will not regret it.

I have several moulds from NOE and they are all incredible. My favorite one is a 400 grain 45 caliber mould that has different points for making flat nose, cup point or hollow point bullets. I like the cup point.

I have bought several molds from NOE. Very high quality. Their version of Ranch Dogs 9mm gas checked bullet is my go to bullet for 9mm. I have hollow point NOE molds for .44 and .45 Colt, and they work as fast as regular molds. I could not believe it. My next mold purchase will start with NOE.

Exceptional bullet molds, very fine quality and Exceptional customer service, give them a phone call and Al will help you with what you need, customer service like this is unheard of!

My latest mold from NOE is an aluminum 5 cavity cut for their copy of the Saeco #315. I ordered it plain based hoping for an accurate plinker for .30/30, .308, and .30/06. All my hopes have been exceeded. This bullet is amazing. With little prep it goes into 1 hole 10 shot groups at 50 yards in all three calibers from bolt action rifles. Looks very promising in lever action. .30/30 . As always NOE exceeds expectations.

Top notch!! I love all my moulds from NOE. NOE produces a huge variety in any caliber you would want. Take a close look at the “Ranch Dog” HP design (my favorite). If casting hollow points don’t overlook getting a lead pot mould guide. Also love the expander plugs, gas checks, & lube. All high quality and MADE IN THE U.S.A!!!Al is always a pleasure to do business with.

I purchased several of NOEs expander plugs to prepare cases for lead bullets. Outstanding product(s). The lead bullets drop straight into the cases without being deformed or shaved. I am using them for 45 caliber and 357s. On Dillon 650 at station one there is no conflict with the Dillon powder die. Fast, accurate, and with lead very little barrel wear.

No burrs. No need to polish or finish these moulds. Give them a light smoking, preheat them, and you’re ready to drop great bullets. And they don’t start to rust in storage. There was an issue with my order and he called me personally to fix it. Great customer service.

Awesome mould! Al is great person to do business with!!

Why are so many molds sold out?

Ordered my mold on Wednesday night. It was delivered Saturday afternoon. Quality is outstanding. Cast about 550 .432 350 grain bullets in about 1 1/2 hours. This is my second mold from NOE. Great experience with this company.

310-165-FN-H3 Is an Awsome mold. I get great bullets very fast and they are very consistent from one cavity to the next. I use it in my 30-06 XCB and get sub 1 10 shot groups when lubed with Carnauba Blue. Ive pushed it to 2850fps in my 14 twist rifle and have had absolutely great results.

I use NOE molds exclusively for 300BO, 30-06, 450 buschmaster & 460 S&W. You won’t regret it. Working my way up to the 1k club.Thanks Al !

Moulds are fantastic! Customer service is excellent. This is the reason I am a member of their thousand dollar club!

Quick and easy to order. Shipping was just as quick. Mold is nicely machined and very well marked. Sprue plate fits and moves smoothly as it should. Will be ordering from again.

I have bought three diferent weight moulds for my Air Force PCP .457 Cal. Texan LSS Carbon Fiber air rifle. 138gr FN, 254gr SP, & 500gr RP. 5 cavity, 4 cav., & 3 cav. Cleaned packing oil off in dishwasher. Followed included break in instructions with my toaster oven, smoked them once heavy, and have cast 5000 bullets with Excelent release and product. I do size down to .457 with sizing dies and finished bullet is excelent. I Really like these moulds!! 1/4, 4 shot groups at 100yrds. I do weigh and separate my bullets in grains. Usually 2 to 3 different grains for each, 1 to 3 grain difference in weight, mainly just 1gr heavier or lighter. Excelent!!!

I have 2, 3 and 4 cav plain base, gas check and hollow point molds from NOE and love them!NOE molds are the absolute best there is for the dollar spent. Do yourself a favor and try one. I don’t think you will be disappointed!

I have many of Swedes products and have never had a bad experience. After Walter at NEI passed I used to have to purchase moulds from companies that were not really cast customer oriented. When I discovered NOE and their commitment to casters desired quality and needs, I was extremely happy and remain so to this day.

The best mold on the market by far. I’ve seen other slugs i like but after casting with their floating pins for hollow points i don’t want to cast any other way.

When I checked out NOE, I was blown away at the number of moulds available. I couldnt find anything they didnt have! Great service, great help, great support. Thanks NOE! You guys are awesome!!!

An excellent bullet mold maker. I have purchased several of their molds and used them successfully in handguns and rifles. I would recommend them to anyone.

Bought .459 x .455 Exp. Plug for .458 Socom reloading. Works like a charm. Will be doing more business with NOE in the future. Would definitely recommend.

NOE Molds are the best Ive ever used. I own 5 of them and they cast great. No reason to buy anything else any more.

This bullet rocks for 300 Blackout and 308. Thanks guys for giving us a mold that fills our needs in something other than 2 cavity. And as usual the mold is first quality. The bullets drop out of the mold without beating on it with a wood stick too.

Bought a pellet mold (300-46-RF-CC4 RG4 cavity HB) for my Hatsan 130S. Absolutely great mold. Tight tolerances, great design. It came with several sets of base pins to create different weight pellets.Couldnt be happier with the mold and the pellets it creates.If you decide to purchase a pellet mold you have to understand that it takes a while to break in and figure it out. There are no short cuts. Patience is key. Follow the directions they provide. Work with it. Try different lead temps, mold temps, pour angles/heights. Keep tweaking the things you can control until you get perfect pellets. That may sound crazy but thats the nature of the beast. As long as you know and understand that going in youre going to love it.

I have molds from multiple makers and the NOE molds are top of the list and produce quality bullets (if, of course you do the proper mold prep and use the right temperatures for both mold and alloy). NOE also has good designs in many caliburs so there is a good chance one will fit your calibur, twist and weight needs.

Great product quality built drops consistent boolets every time quick shipping and friendly service

Very well made moulds, drops a nice bullet. Looking forward to my next purchase.

I got 15 different molds from NOE, from .264 all the way to .515, these are some of the best molds ive used, will continue to buy more as they will last a lifetime

Prompt shipping. Great communication. Will order again

Last year I purchased the 315-102 SWC in a four cavity aluminum configuration. This is a very close clone to the popular RCBS 32-98 SWC. Ive cast possibly 1500 bullets and this mold is a pleasure to use. Bullets drop .315-.316 using my unknown range scrap and easily size .314. My only regret was not being able to get this mold in brass. Noe has not had any for several years which is unfortunate. I would buy one in an instant if available. You wont go wrong buying any Noe molds.

If you are looking for high quality molds looks no further. Will be getting additional molds in the future!!!

Bought 2 molds, both very high quality, and very fairly priced. Shipping was very fast also. Will be buying 9 and 45 molds soon. Extremely pleased with products.

Great Single shot tray for Crown and Dreamline .25, fits and finish are great.

A massive range of moulds with great designs and great service.

I purchased the NOE scope mount for my Rossi R92 in 454 Casull/45 LC. The mount arrived in excellent condition with good packaging. Once I removed the factory rear sight, the mounting holes aligned to my rifle perfectly. I applied a small amount of Loctite 680 to the supplied screws, then installed them evenly at 20 inch pounds of torque. The rings and scope mounted easily and all function test very well.This is a precision made product and recommended if you wish to mount optics or other red dot type sights on the R92 platform.I intend on using mine for hunting and have done so with the factory sights, but my aging eyes really appreciated the scout scope I mounted for earlier morning and late evening ethical shooting.Thank you for manufacturing such a fine product!Ray TribbleSealy, TX.

Great moulds, very high quality at a competitive price will definitely buy again.

Al Nelson makes great molds, and the service is awesome. Any time I am looking for a new bullet mold, NOE is the first place I look.

Al is great very knowledgeable and always willing to help!

Great service and a great product.

Speedy shipping and machining is next to none!

First class service and moulds !

Great product and great company

Good quality items!

Perfect. Thank you.

Excellent service and moulds

For all lovers of filling ammunition

Great product