These guys are awesome! Very professional, gave me good advice for rebuilding my Jeep engine. And had my lost nut 😂highly recommended, good people!

This has been my go-to machine shop for as long as I can remember. They only work on OHV push-rod motors these days, and I have the highest confidence in their work.

Incredible work and very friendly staff, been here twice so far and they’ve had the work done way earlier than I expected and it was great quality every time. Will be back often!

Great people! Got the Job done! Will be back to do business with All pro Automotive!

Horrible customer service and is cant clean an engine properly

I have a 1936 Plymouth and they did the head on it they did a fantastic job

I have 2 cylinder heads for my 2002 3.5l V6 SOHC Mitsubishi Montero that needed resurfacing. Mark was able to resurface them; unfortunately he found that there was warping that could not be corrected and leaks in the valves. This would have been the cause from my truck losing all the radiator coolant on the highway at 65mph. Mark notified me in good conscience that this would be an issue and recommended a few good routes. I would strongly recommend this business to resurface or remachine anyfuture projects to others. Thank you

I took my 1960 y block 292 v8 in to them to have the block inspected and honed. Not only did they inspect the block when they found a problem with it they showed the problem to me and fixed it. I highly recommend all pro to anyone in need of honest people and quality work. I will continue to use all pro for my future engine builds.

Dont know a ton about the engine they helped amazingly walked me though all parts was super friendly got a sweet setup Bett everyone prices Ive seen around

Steve is very honest and knowledgeable, his staff is also knowledgeable and friendly. Steves equipment is pretty new and very nice. They are experienced with every make and model. The prices are very reasonable too. Ive been doing business with Steve since 2008 and I have never had an issue with him or any of the work I have had done. From drag race Ford stroker engine builds, circle track Chevrolet racing engines, Subaru heads, BMW heads, Ford SOHC and DOHC heads, they do great work at All Pro!

Great, place. Owner is very polite knowable, was able to take care of me very quickly. Highly recommend, this local long time shop owner, he is very wise. Like alot of people out there, and hes definately trust worthy, which is the most important part. Had a block done machine well, perfect. Very happy. :)

Drilled a pitman arm for me the day of after calling many machine shops. Steve is a great guy, Ill definatly be back in the futurs

If you need your motor machined this is the place to go. Ask for Steve.

Great place to have your motor work done. Ask for a gentleman named Steve tell him George from next door recommended him . hes a great honest man he wont stear you wrong if he can save you money he will best part about him is he is honest and he will tell you upfront whats wrong what part you need and how much it will cost you

These guys were easy to work with, knowledgeable, helpful and seem genuinely passionate about what they do.I had some cylinders honed and a cylinder head cleaned and serviced. They did a great job. I will definitely go back.

Quick turnaround! Fair pricing

Guys have always been good to me known them for years

They are very knowledgeable and do great work. Get things done in a reasonable time and have excellent prices. Cant ask for more than that!

Horrible Service, Lack of Knowledge!!Steve Tried to rebuild my 6.1 Hemi 3 different times, the work was garbage, i was left with a leaking smoking car until other issues came up to having me investigate the final motor work that was done 8 months ago. The machine work was horrible scoring on the heads and piston walls, failed the leak down test as well as the compression test. My pistons were hitting my valves ect. Each time i spoke with Steve he was very irritated and hard to work with, i can understand considering his shops poor job and his name and money on the line.. I never received any paperwork for the work and parts that were put in my car from the second rebuild or the third i asked Steve and he first told me he would get it together, weeks went by nothing, i told him i needed everything that was done the past two rebuilds and he told me to go down later on that day and so i did, to my surprise Steve was not there. I called him later on he told me he was in the hole with the car and he wasnt going to give me the list of parts or number that were put into my car because i didnt pay for the extra stuff that he had to fork out his own pocket for, i then corrected and stated i paid you for the work to be done correctly, i am still under warranty and i needed to know what was done to my car for my records He then told me he will get a work order for me of the work that was done to my engine but no part numbers. Until this day i never got those..From all the damage that Steve and his crew did to my motor at All Pro Machine And Fab caused me lose out on my motor because it was not salvageable, i had to get a new one from a Dodge Dealer...I hope who ever is looking into this Shop steers far far away. If i could give a zero star rating i would, horrible horrible customer service, horrible job, lack of knowledge. I hope no one falls victim to them like i did, their doors need to shut down for good!I left out quite a bit to this whole story, but trust me its a mess...

Horrible workmanship, sent my block and heads in for machine work. My cam bearings were not aligned properly. The bearings were gouged and scored. The heads had so much work done Steve couldnt even tell me exactly what they did. I was sold used parts and parts I cant even get part numbers for. $2000 bill for work that is poor and unacceptable. DONT WASTE YOUR TIME OR MONEY HERE.

I paid $40 to have a bung welded on an oil pan. Their weld leaked and it requires me to remove the oil pan (another 3.5 hrs) to fix. They wouldnt give me my money back either. Horrible work and terrible customer service. Do not recommend.

The shop is great Steve is very knowledgeable you get quality work for the price you pay

Loved it

Great folks here they do great work and are very helpful

Im leaving out many details, but I had an Audi motor rebuilt and they took 5 months. Steve was giving me the run around telling me that he was waiting on bearings to come back from Calico. I called Calico and Steve had no orders with them. He was lying to my face. I finally got the motor after nearly 6 months just to find out they put in too small of an oil freeze plug. After ten miles of driving, freeze plug blew out, I lost all oil and spun a rod bearing, ruining the crank. Steve argued that it wasnt his fault. After fighting him, he agreed to rebuild it. 8 months go by before I get my motor back for the second time. Its in pieces and I have to pay my mechanic to reassemble it!Stay away! Im not sure why he treats some customers great while he treats other customers the way he treated me.Btw, I was originally quoted 600-900 for the rebuild, and he wouldnt let me pick it up until I paid the final invoice... $1440.I will never go back, no matter how good of job they do.

They kept saying they would have it done maybe today or tomorrow after several weeks I picked up my parts that they did not even touch this ruined me I needed my project done and sold dont ever use this business for anything

Horrible work, and never once called to inform of build progres. stay away

Excellent and fast service.

Kept taking my money for build, payed for it now cant get engine or parts I took in. Horrible place.